Stably Semi-Automatic Pet / Plastic Bottle Mould Blowing Machine
260kg
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which
improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area
in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the
proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the
production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the
blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the
machine easier to understand.
11). Low costhigh efficiency easy operation and maintenance etc, profited from the fully automatic
technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install test and start up.
14). Low rejection rate: Less than 0.2 percent
Technical parameter
| Name |
Item |
Unit |
Details |
| Blowing machine |
Dimension |
mm |
1500*600*1750mm |
| Bottle volume (max) |
ml |
2000 |
| Bottle volume (min) |
ml |
50 |
| Bottle Neck Diameter (max) |
mm |
40 |
| Bottle Neck Diameter (min) |
mm |
18 |
| Body Diameter (max) |
mm |
125 |
| Body Height( max) |
mm |
420 |
| Number of Cavities |
mold |
2 |
| Production output |
pcs/h |
800-1000BPH |
| Clamping force |
T |
5.7(56KN) |
| Mold thickness |
mm |
200(max) |
| Mold width |
mm |
360x390 |
| Space between Tie-bars |
mm |
120-220 |
| Diameter of Tie-bars |
mm |
63 |
| Scope of Tie-bars |
mm |
405 |
| Mold stroke |
mm |
160 |
| Stretching stroke (max) |
mm |
420 |
| Working pressure |
Mpa |
0.8-1.0Mpa |
| Blowing pressure |
Mpa |
2.0-3.0Mpa |
| Voltage/Power |
V/KW |
220V/1KW |
|
Pre-heater
|
Dimension |
mm |
1870*630*1450mm |
| Weight |
kg |
260 |
| Voltage/Power |
V/KW |
380V/14KW |
Product Tags:
|
|
1000BPH Bottle Blowing Machine 1.0Mpa Working Pressure Full Automatic Images
|
